- Facility Closed
Gutter Topper
09/22/2026
Start Time 10:00 AM ET
Day Prior From 10:00 AM to 4:00 PM or By Appointment with [email protected]
Rollforming Lines
- 22 Stand x 2″ RLM Gear Driven Rollformer Line with 2″ Arbors, 26″ Roll Space, 12″ Between Centers, with 4,000 lb. RLM Dual Uncoiler, 22″ RLM Seven-Roll Straightener, 12″ x 26″ RLM Hydraulic Pre-Punch Cut-Off, Allen Bradley Control (New 2004) **Only 917 Hours Showing** Tooled For Terminator Line
- 30 Stand x 1.5″ RLM Gear Driven Rollformer Line with 1.5″ Arbors 20″ Roll Space, 12″ Between Centers, with 10,000 Lb. RLM Dual Uncoiler, 20″ RLM Seven-Roll Straightener, 28″ x 37″ RLM Hydraulic Pre-Punch Cut-Off, Allen Bradley Control (New 2003) **5,633 Hours Showing** Tooled For Dutter Topper Line
- 30 Stand x 1.5″ RLM Gear Driven Rollformer Line with 1.5″ Arbors, 20″ Roll Space, 12″ Between Centers, with 2,500 Lb. CHS Dual Uncoiler, 12″ CHS Seven-Roll Straightener, 27″ x 32″ RLM Hydraulic Pre-Punch Cut-Off, Allen Bradley Control (New 2001) tooled for Leaf Solutions Line
- Additional Rollforming Tooling
Pallet Racking and Stretch Wrappers
- (160) Sections – 48″ Deep x 96″ Wide x 16′ Adjustable Beam Pallet Racking with Wire Decking
- (17) Sections – 42″ Deep x 144″ Wide x 16′ High Adjustable Beam Pallet Racking
- (2) Cousins Stretch Wrappers
Fabrication Equipment
- 30 Ton x 80″ Adira Model QH3020 Press Brake
- 16 Ga. x 6′ Pexto Mechanical Shear
- 4′ Chicago Model 131 Press Brake
- 4′ Tennsmith Finger Brake
Forklifts and Man Lift
- (4) 8,000 Lb. – 5,000 Lb. Late Model Yale LP Gas Lift Trucks
- 5,000 Lb. Daewoo G25S LP Gas Pneumatic Tire Lift Truck
- 4,000 Lb. Hyster J40XNT Electric Three-Wheel Lift Truck **700 Hours Showing**
- 3,000 Lb. Hyster H30XMR Electric Reach Truck
- Bil Jax ESP19 Electric Man Lift **1,048 Hours Showing**
Shop Equipment
- 7.5 HP Speedaire Air compressor
- (4) Vestil Dump Hoppers
- Advance 3800 Floor Scrubber
- Toolroom Equipment Including 13″ x 40′ Milport Lathe, Wilton Combo Sander, Surface Grinder, Floor Drills, Welders
- Shop Equipment Including (4) Fireproof Cabinets, Tile Saw, Ridgid Snake, Floor Jacks, Fan and More
GENERAL INFO
Buyer’s Premium: 20% in effect for all purchases
Times Posted: All posted Auction start or ending times are local at the address for the Auction. For example, if the auction is in New York time is Eastern, Chicago time is Central, California time is Pacific.
STEPS FOR BIDDER APPROVAL
Step 1: Register to bid via the “Bid Online” link above.
Step 2: You will receive an email from a representative at CIA Industrial (search @cia-industrial in your inbox or spam). We will send these forms out starting about 2 weeks prior to the Auction date every morning and evening.
Step 3: The email from the CIA Industrial rep will contain forms to fill out which can either be signed digitally via Sign Now or printed and scanned/faxed back.
- If you are located inside the U.S. fill out the information on the forms that you have readily available, and documentation agreeing to the removal terms. If you don’t have some of the information, just put N/A and we will contact you if we decide we need more.
- If you are located outside the U.S. or have NEGATIVE FEEDBACK on your profile you will need to provide a deposit. Information on how to make this deposit will be included in the email from the CIA Industrial rep. These deposits are refundable if no purchases are made at the Auction and will be returned within 48 hours.
Once we receive the returned forms or required deposit, we will approve you to bid.
CIA Industrial reserves the right to reject Bidders at their sole discretion.
CHECKOUT HOURS:
Wednesday, September 23rd thru Friday, September 25th from 8:00 AM to 4:00 PM
Monday, September 28th thru Friday, October 2nd from 8:00 AM to 4:00 PM
Monday, October 5th thru Friday, October 9th by appointment only
All items must be removed by October 9th, 2026 unless noted in the lot description or approved by Auctioneer in writing.
“TIME IS OF THE ESSENCE” ALL ITEMS MUST BE OFF THE PREMISES BY FRIDAY OCTOBER 9TH, 2026 AT 4:00 PM. UNLESS NOTED IN THE LOT DESCRIPTION OR APPROVED BY AUCTIONEER IN WRITING.
At the Owners Discretion, any items remaining after this time will be removed from the premises and stored at the expense of the buyer or considered abandoned and scrapped.
REMOVAL OPTIONS
CW Wood | Chuck Wood | Call/Text: 513-310-7911 | [email protected]
JNK Rigging | Joe Knuckles | Call/Text: 513-520-7937 | [email protected]
Altra Machinery Movers | Chris Altman | Call/Text: 859-250-9893 | [email protected]
Rollforming Lines
- 22 Stand x 2″ RLM Gear Driven Rollformer Line with 2″ Arbors, 26″ Roll Space, 12″ Between Centers, with 4,000 lb. RLM Dual Uncoiler, 22″ RLM Seven-Roll Straightener, 12″ x 26″ RLM Hydraulic Pre-Punch Cut-Off, Allen Bradley Control (New 2004) **Only 917 Hours Showing** Tooled For Terminator Line
- 30 Stand x 1.5″ RLM Gear Driven Rollformer Line with 1.5″ Arbors 20″ Roll Space, 12″ Between Centers, with 10,000 Lb. RLM Dual Uncoiler, 20″ RLM Seven-Roll Straightener, 28″ x 37″ RLM Hydraulic Pre-Punch Cut-Off, Allen Bradley Control (New 2003) **5,633 Hours Showing** Tooled For Dutter Topper Line
- 30 Stand x 1.5″ RLM Gear Driven Rollformer Line with 1.5″ Arbors, 20″ Roll Space, 12″ Between Centers, with 2,500 Lb. CHS Dual Uncoiler, 12″ CHS Seven-Roll Straightener, 27″ x 32″ RLM Hydraulic Pre-Punch Cut-Off, Allen Bradley Control (New 2001) tooled for Leaf Solutions Line
- Additional Rollforming Tooling
Pallet Racking and Stretch Wrappers
- (160) Sections – 48″ Deep x 96″ Wide x 16′ Adjustable Beam Pallet Racking with Wire Decking
- (17) Sections – 42″ Deep x 144″ Wide x 16′ High Adjustable Beam Pallet Racking
- (2) Cousins Stretch Wrappers
Fabrication Equipment
- 30 Ton x 80″ Adira Model QH3020 Press Brake
- 16 Ga. x 6′ Pexto Mechanical Shear
- 4′ Chicago Model 131 Press Brake
- 4′ Tennsmith Finger Brake
Forklifts and Man Lift
- (4) 8,000 Lb. – 5,000 Lb. Late Model Yale LP Gas Lift Trucks
- 5,000 Lb. Daewoo G25S LP Gas Pneumatic Tire Lift Truck
- 4,000 Lb. Hyster J40XNT Electric Three-Wheel Lift Truck **700 Hours Showing**
- 3,000 Lb. Hyster H30XMR Electric Reach Truck
- Bil Jax ESP19 Electric Man Lift **1,048 Hours Showing**
Shop Equipment
- 7.5 HP Speedaire Air compressor
- (4) Vestil Dump Hoppers
- Advance 3800 Floor Scrubber
- Toolroom Equipment Including 13″ x 40′ Milport Lathe, Wilton Combo Sander, Surface Grinder, Floor Drills, Welders
- Shop Equipment Including (4) Fireproof Cabinets, Tile Saw, Ridgid Snake, Floor Jacks, Fan and More
GENERAL INFO
Buyer’s Premium: 20% in effect for all purchases
Times Posted: All posted Auction start or ending times are local at the address for the Auction. For example, if the auction is in New York time is Eastern, Chicago time is Central, California time is Pacific.
STEPS FOR BIDDER APPROVAL
Step 1: Register to bid via the “Bid Online” link above.
Step 2: You will receive an email from a representative at CIA Industrial (search @cia-industrial in your inbox or spam). We will send these forms out starting about 2 weeks prior to the Auction date every morning and evening.
Step 3: The email from the CIA Industrial rep will contain forms to fill out which can either be signed digitally via Sign Now or printed and scanned/faxed back.
- If you are located inside the U.S. fill out the information on the forms that you have readily available, and documentation agreeing to the removal terms. If you don’t have some of the information, just put N/A and we will contact you if we decide we need more.
- If you are located outside the U.S. or have NEGATIVE FEEDBACK on your profile you will need to provide a deposit. Information on how to make this deposit will be included in the email from the CIA Industrial rep. These deposits are refundable if no purchases are made at the Auction and will be returned within 48 hours.
Once we receive the returned forms or required deposit, we will approve you to bid.
CIA Industrial reserves the right to reject Bidders at their sole discretion.
CHECKOUT HOURS:
Wednesday, September 23rd thru Friday, September 25th from 8:00 AM to 4:00 PM
Monday, September 28th thru Friday, October 2nd from 8:00 AM to 4:00 PM
Monday, October 5th thru Friday, October 9th by appointment only
All items must be removed by October 9th, 2026 unless noted in the lot description or approved by Auctioneer in writing.
“TIME IS OF THE ESSENCE” ALL ITEMS MUST BE OFF THE PREMISES BY FRIDAY OCTOBER 9TH, 2026 AT 4:00 PM. UNLESS NOTED IN THE LOT DESCRIPTION OR APPROVED BY AUCTIONEER IN WRITING.
At the Owners Discretion, any items remaining after this time will be removed from the premises and stored at the expense of the buyer or considered abandoned and scrapped.
REMOVAL OPTIONS
CW Wood | Chuck Wood | Call/Text: 513-310-7911 | [email protected]
JNK Rigging | Joe Knuckles | Call/Text: 513-520-7937 | [email protected]
Altra Machinery Movers | Chris Altman | Call/Text: 859-250-9893 | [email protected]
Payment Information
Accepted methods of payment for deposits and invoices
Terms & Conditions
All bidders and attendees must agree to these terms of sale